Master Cylinder Snap Ring Pliers

Motion Pro master cylinder snap ring pliers. These come in really handy while rebuilding the brake master cylinder on most Honda CB's from the 70's and many other bikes. The snap ring on the master cylinder is just out of reach for most snap ring pliers. Don't waste time trying to pick out that snap ring with various other tools, get it in and out smoothly with this special tool. Always remember to wear eye protection whenever removing or installing snap rings.It helps if you can press the piston down to release the pressure from the snap ring, then rotate the snap ring so that it's more accessible before removing it. If the piston is seized or the snap ring will not rotate once the piston is pressed, then try soaking it in penetrating oil before attempting to remove it.Can be used to remove and replace small to medium internal snap rings up to 50mm (2") deep.Commonly used on master cylinder, transmission gear locating, bearing retention and oil seal snap rings.Made in the USA.Motion Pro Part Number: 08-0279Replaces Honda Tool Part Number: 07914-SA50001Replaces Kowa Tool: AKS-316-2010

• Caster cylinder snap ring pliers. These come in really handy while rebuilding the brake master cylinder on most Honda CB's from the 70's and many other bikes.
• It helps if you can press the piston down to release the pressure from the snap ring, then rotate the snap ring so that it's more accessible before removing it. If the piston is seized or the snap ring will not rotate once the piston is pressed, then try soaking it in penetrating oil before attempting to remove it
• Can be used to remove and replace small to medium internal snap rings up to 50mm (2") deep.
• Commonly used on master cylinder, transmission gear locating, bearing retention and oil seal snap rings.
• Part Number: 08-0279<br />Replaces Honda Tool Part Number: 07914-SA50001 - Replaces Kowa Tool: AKS-316-2010