Karnak 44 Klear Waterproof Caulk (10.1oz) – Creates a Clear Water-Resistant Seal – Outstanding Adhesion and Flexibility – Exterior/Interior Application - Water-Based Low VOC (Pack of 6)

History: Karnak Corp has been around for over 85 years manufacturing the highest quality sustainable roofing and building solutions to protect, restore, and extend the life of the building envelope while reducing the environmental impact. SURFACE PREPARATIONS: All surfaces to be caulked must be dry, clean and free from mildew, loose paint or coatings, oil, grease, rust, dirt, and other foreign matter. Recommended application temperature is 40°F to 120°F. CAUTION: Do not apply to wet surfaces or when rain or freezing temperatures are expected within 24-36 hours. Cold temperatures and high humidity will retard curing. Protect unused product from freezing. Coating must be cured before exposure to water. Store in a heated room between 50ºF and 100ºF. Keep the container away from heat. Avoid prolonged contact with skin. Wash exposed areas with soap and water. Avoid breathing vapors in confined areas. If the product gets into eyes, immediately flush with large amounts of water while holding the eyelids open then seek medical attention. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Dispose of it in an environmentally safe manner.

• WATER RESISTANT SEAL: Multi-purpose, terpolymer acrylic caulk that’s specially formulated to provide a clear water-resistant seal. It’s manufactured to a smooth, creamy consistency for ease of application by standard caulking gun. Goes on milky white uncured, cures clear
• EXTERIOR & INTERIOR APPLICATIONS: Creates a water-resistant seal on wood, drywall, plaster, brick, concrete, masonry, tile in bathrooms and metal surfaces above grade
• EXCELLENT ADHESION: 44 Klear sag resistant properties and clear color make it an excellent sealant for cracks around windows, doors, trim, molding, window air conditioners, metal chimney flashings, siding and general-purpose use for vertical applications. Do not use in areas subject to water ponding
• HOW TO USE: Cut spout at an angle to desired bead size and load into a standard caulking gun. 44 Klear Seal Caulk should be applied with even pressure directly over the crack or joint. Remove excess caulk before applying
• COVERAGE RATE & CURING: A 1/4” x 1/4” head of caulk will yield approximately 25 lin. ft. per 10.1 oz. caulking cartridge. Coverage rate may vary depending on desired thickness and surface being caulked. 44 Klear Seal Caulk dries quickly to the touch in about 1 hour and may be painted over after 4-6 hours dry time (depending on temperature and humidity)