AC Heater Blower Motor Assembly for 2002-2004 Jeep Grand Cherokee 2002-2008 Dodge Ram 1500 2500 3500,5096255AA/700012

HVAC Blower Motor Fits the Following Vehicles:Fit for 2002-2008 Dodge Ram 1500Fit for 2002-2008 Dodge Ram 2500Fit for 2002-2008 Dodge Ram 3500Fit for 2002-2004 Jeep Grand CherokeeReplaces Part Numbers:5096255AA, 700012, 5096256AA, 5012701AB, 615-00649, 615-00635, 615-0629, 75743, 3010483, PM9198, PM3788, 5488, 100303BENEFIT OF THE BLOWER MOTER:1.Provides a comfortable ride for passengers.2.Reduces the fatigue of the driver.3.Improves the safety of driving, air purification.HOW TO INSTALL A NEW BLOWER MOTOR:1.Remove the screws under the passenger side dashboard of the vehicle.2.Find the HVAC blower motor.3.Disconnect the blower motor electrical connector.4.Remove the old blower motor.5.Compare the new blower motor to the old one to verify that you have the correct part.6.Install the new blower motor into the box and tighten the screws.7.Connect the blower motor electrical connector.8.After the installation is complete, turn on the air conditioner and check if it is running normally.Blower Maintenance:Clean the dust inside the motor regularly, especially the dust,dirt and other impurities on the impeller to prevent rust and imbalance.Tips1.When you replace the blower motor, it is recommended to replace the new blower motor resistor.2.Please use the year/make/model drop down bar confirm the compatibility before purchasing.Package including:1 x Blower Motor Fan

• [Fitment] --- Blower Motor is compatible with 2002-2008 Dodge Ram 1500,2002-2008 Dodge Ram 2500,2002-2008 Dodge Ram 3500,2002-2004 Jeep Grand Cherokee.Replaces Part:5096255AA / 700012.
• [Features] --- The AC Blower Motor is responsible for producing air that goes through the vents of your vehicle's AC and heating system. If your AC or Heater does not produce or circulate any heated or cooled air then you may have a problem with your blower motor.This replacement blower motor Assembly can get your Heater or AC System up and running again.
• [Quality] --- High-quality new raw material, to make sure products’ high quality. Material of rotor punching plate is silicon steel sheet. Enameled wire is used copper enameled wire.
• [Installation] --- Locate the HVAC blower motor under the passenger side dash. Removing the dash may be necessary to access the blower motor on some vehicles.
• [Warranty] --- Please contact us if you have any question regarding our this product.